Etching Blog

copper plates blocking out ready to aquatint
copper plates blocking out ready to aquatint
aquatinting foreground
aquatinting foreground
after equating washed off ready to proof print
after equating washed off ready to proof print

first print
first print
zinc plate before soap ground with blocked out area
zinc plate before soap ground with blocked out area
using soap ground on large zinc plate of carrier
using soap ground on large zinc plate of carrier
blocking out carrier print to spit bit
blocking out carrier print to spit bit
first proof
first proof

Day 1,2 and 3 of Residency at the Maison de Gravure / Montpellier

working on Songs of Nature series and Carrier ideas . These are all fairly small 29 x39 cm zinc plates na d 20x 25cm copper plates. The copper I have really enjoyed using – much more responsive to the delicate drawing – on both i have experimented with white soap ground on short bit times to try and get a meter more diverse aquatint. This week also i went out drawing directly onto the plates by the waterfalls in the gard – near Ganges. Whilst there I had a meeting with an otter – who came right up to me to check me out – it was actually snowing but you cant see that in the pictures.

Larger Zinc Plates

IMG_1986 (2)
IMG_1960

week 2 and 3

Worked on small Copper plates – partly exploring techniques with soap and the idea of empty shacks/ tree houses. working on copper was so much better than Zinc, the line much more sensitive. All aquatints were using Edinburough etch rather than Nitric – which I would have preferred, but was not an option for me at the Atelier here.

IMG_5398
IMG_5399
IMG_5402

Week 4 and 5

After drawing at the waterfalls near Gange a few weeks before I wanted to continue with a zinc etching for the Songs of Nature series (using Braille holes). I made 3 plates but only one was really any good . Based on a fish trap that I saw in the river. I printed it in black on paper with gradating colours . In the end I used Blue / black and double printed .

IMG_5428
IMG_5420

   First print 30 x 40 cm

week 5 and 6

Began work on the large plate. The disused Greenhouse and farm up the road is going to be a constant source of inspiration for me this summer.  What interested me initially is the idea of the outside being inside this fragile structure. I wanted to somehow experiment with this structure in print – using predominantly a linear approach.

Drawing up the large zinc plate was very time consumming – through the hard ground. It took all day to get it right. I left the hard ground with its faults – which I wanted to become part of the etching and I knew the acid would bit through.  Again colour needed to become part of this piece and as I had just worked on 2 large drawings for Bearspace Gallery in London i decided to use gradated pre coloured paper – rather than my chin colle gradated paper.

IMG_5430
IMG_5463
IMG_5462

first etched lines after aquatinting the windows and door painting our for aquatinting the foliage.

_MG_2136

Finished piece after double printing.

_MG_2144

 Blue Edition

Last week of Residency

working on etching a smaller version of Greenhouse plate and a new version of Greenhouse, Havent yet worked out how it will be shown.

IMG_5517
IMG_5520
IMG_5518

plates with soap before aquatint and sugar lift for foreground and first print.